Troubleshoot the error code 0xc18a0201 in HP Printer

The error code 0xc18a0201 in HP Printer is the mechanical trouble occurring in the HP Printer. This error can stop the printing function in the middle of a printing job. A technical error creates a lot of disturbance for the users. There are many error codes and among them is the error code 0xc18a0201 that creates troubles in the printer. To maintain the quality of the printer, you can take the help of the HP Printer Support team. The team members will eventually help you to troubleshoot the technical error. In the next section of the blog, we will discuss the cause and solutions of the error code 0xc18a0201 in HP Printer.

Causes of the error code 0xc18a0201 in HP Printer:

error code 0xc18a0201 in HP Printer

Printers are technical devices and they can face the technical issue at times. The error code 0xc18a0201 in HP Printer can occur because of the technical trouble occurring up in the HP Printer. This technical error can occur due to four reasons. The error can occur due to:

  • Ink system of the printer gets failed out to perform.
  • The trouble of the low ink in the ink cartridges.
  • The ink getting overfull in the cartridge.
  • This trouble can also occur because of the ink getting in contact with the chip present in the cartridge and missing out of cartridge chip.

Technical troubles can affect the working functions of the printer. The printing work can stop all of a sudden and fail to perform in a good manner. Technical error needs to be driven away as soon as possible. Let us discuss the solutions to troubleshoot the error code 0xc18a0201 in HP Printer.

Guidelines to troubleshoot the error code 0xc18a0201 in HP Printer:

The error code 0xc18a0201 in HP Printer needs to be driven away from the printer. Technical error remaining in the printer for a long period of time can affect the quality of the printer. The following solutions are as follows:

Method 1:

  • Keep the printer in turn on mode.
  • Now plug out the USB cable from the printer.
  • Next, open the printer cover door.
  • Pull out the ink cartridge inside the printer.
  • Wait for the printer to show up the message with ‘Insert Cartridge’.
  • Next, plug out the power cords of the printer from the backside of the printer.
  • Again you will have to wait for some time.
  • Plug in the power cords of the printer to the backside of the printer.
  • Now press out the power button in case the printer does not start by itself.
  • When the printer gets ready put back the ink cartridge into the printer.
  • Close the printer cover door completely.
  • Lastly, plug in the USB cable to the printer and then check out the printer to drive away from the error through a test print.

error code 0xc18a0201 in HP Printer

Method 2:

  • Here, you will have to press and hold on to the left arrow of the printer.
  • Now release the left arrow key and then press out the setup key.
  • Next click on the ‘Enter special key combo’.
  • Select the right arrow key until the message appears in the ‘System Configuration Menu, and then click OK.
  • Now, wait for the message to display with ‘Hardware failure status and then click on OK.
  • The message appearing ‘Hardware failure status cleared’, press OK and Cancel button to continue.
  • Hold the Cancel button till the message gets displayed with ‘Welcome to Photosmart Express’ ‘Ink System Failure’.
  • Next shut down the printer.
  • Pull out the power cables from the electric connectivity.
  • Wait for some time and then plug in the power cords.
  • Now turn on the printer and wait till the message gets displayed as ‘Use the Power button to shut down the Printer’.
  • Now click on the OK button.
  • Check out the error if it is being cleared or not.

By following up these solutions you will be able to troubleshoot the error code 0xc18a0201 in HP Printer. You can also take the help of the HP Printer Support team to troubleshoot the error code 0xc18a0201 in HP Printer.

HP Printer Support

error code 0xc18a0201 in HP Printer

HP Printer Support comprises of expert professional that helps to troubleshoot the technical error from the printer. It is a third party service provider that helps to provide the best customer solutions. You can call at +1-888-621-0339 and take the technical help from the team members. The team does not take any hidden charge for helping out the customers.

Add a Comment

Your email address will not be published. Required fields are marked *